The United States Environmental Protection Agency in Washington DC. (Photo by: Loop Images/UIG via Getty Images)

On March 14, 2016, Environmental Protection Agency (“EPA”) proposed changes to the Risk Management Plan Program (“RMP”) Rule. On December 21, 2016, the EPA disclosed its changes via a Pre-Publication Copy.  A series of blogs are planned to address five major changes: root cause analysis for near misses, third-party audits, inherently safer technology,

The United States Environmental Protection Agency in Washington DC. (Photo by: Loop Images/UIG via Getty Images)

On March 14, 2016, Environmental Protection Agency (“EPA”) proposed changes to the RMP Rule . On December 21, 2016, the EPA disclosed its changes via a Pre-Publication Copy.

In the proposed rule, the EPA essentially agreed that the scope and trigger for post incident investigation was not universally understood or applied. The final rule

12

On November 18, 2016, the Occupational Safety and Health Administration (“OSHA”) issued a final rule “revising and updating its general industry standards on walking-working surfaces to prevent and reduce workplace slips, trips, and falls, as well as other injuries and fatalities associated with walking-working surface hazards.” 81 Fed. Reg. 82494 (Nov. 18, 2016) .  Regulations

12

The Occupational Safety and Health Administration (“OSHA”) published a Request for Information (“RFI”) on December 9, 2013 concerning possible changes to the Process Safety Management (“PSM”) program codified at 29 C.F.R. 1910.119. See 78 Fed. Reg. 73756 (Dec. 9, 2013). Likewise, the Environmental Protection Agency (“EPA”) published an RFI on July 31, 2014 relating

refinery1a

The Environmental Protection Agency (“EPA”) published a Request for Information (“RFI”) on July 31, 2014 relating to possible changes to the Risk Management Program (“RMP”) rules codified at 40 C.F.R. Part 68. See 79 Fed. Reg. 44604 (July 31, 2014). On June 19, 2015, OSHA, the EPA, and the Department of Homeland Security held a

OSH

The Occupational Safety and Health Administration (“OSHA”) published a Request for Information (“RFI”) on December 9, 2013 concerning possible changes to the Process Safety Management (“PSM”) program codified at 29 C.F.R. 1910.119. See 78 Fed. Reg. 73756 (Dec. 9, 2013). Likewise, the Environmental Protection Agency (“EPA”) published an RFI on July 31, 2014 relating

flare

Last year, the EPA announced its intention to add or modify a number of AP-42 emission factors, primarily for petroleum refineries, pursuant to a consent decree entered into with Air Alliance Houston, Community In-Power and Development Association, Inc., Louisiana Bucket Brigade and Texas Environmental Justice Advocacy Services (“Plaintiffs”).  The EPA informally solicited comments on its

plant

The Occupational Safety and Health Administration (“OSHA”) published a Request for Information (“RFI”)  on December 9, 2013 concerning possible changes to the Process Safety Management (“PSM”) program codified at 29 C.F.R. 1910.119.  See 78 Fed. Reg. 73756 (Dec. 9, 2013).  Likewise, the Environmental Protection Agency (“EPA”) published an RFI on July 31, 2014 relating

chemical_plant

The Occupational Safety and Health Administration (“OSHA”) published a Request for Information (“RFI”)  on December 9, 2013 concerning possible changes to the Process Safety Management (“PSM”) program codified at 29 C.F.R. 1910.119.  See 78 Fed. Reg. 73756 (Dec. 9, 2013 ).  Likewise, the Environmental Protection Agency (“EPA”) published an RFI on July 31, 2014 relating

drilling

The Occupational Safety and Health Administration (“OSHA”) published a Request for Information (“RFI”)  on December 9, 2013 concerning possible changes to the Process Safety Management (“PSM”) program codified at 29 C.F.R. 1910.119.  See 78 Fed. Reg. 73756 (Dec. 9, 2013).  Likewise, the Environmental Protection Agency (“EPA”) published an RFI on July 31, 2014 relating